Skip to main content

How to Accept a Log Edit

Your Admin can suggest log edits to certified logs, these edits must be accepted or rejected by the driver.

After your Administrator completes the edit request, you will receive a pop-up notification in your application. Use the instructions below to accept the edit.

  1. Tap on View Request.
    ​

  2. Tap on the hamburger menu icon.
    ​

  3. Once Edit Request details appear, you can tap Accept or Reject.
    ​

  4. If you accept the request, you will be navigated to the "Edit Request" page. This is where you confirm the edit by tapping Accept.

  5. You will need to uncertify your log by tapping Uncertify.
    ​

  6. You must recertify your log once the edit has been applied to your RODS by tapping Re-Certify.
    ​

    The suggested log edit is applied to your RODS.
    ​

    Note: If you miss the "log entry change request" pop-up, you can tap on the bell icon and tap Edit Request in the menu. Then complete Steps #2-6.

Did this answer your question?